Garage 
Login 
- Number of pins: 3
- Sensor Type: Hall Sensor
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 23.9
Sensor/Probe - VW JETTA III (1K2) (2004 - 2013) 1.4 TSI, 125 kW
- for OE number: 03D 907 601
- Length [mm]: 60
- Supplementary Article/Info 2: with seal ring
- Fabrication Number: ECP-AU-004
Incl. VAT 0%
7.28 EUR
- Resistor [Ohm]: 6
- Number of circuits: 4
- Conductor Number: 4
- Length [mm]: 651
- Cable Length [mm]: 651
Incl. VAT 0%
18.94 EUR
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 300
- Number of pins: 4
- Version: AM
- Article number of recommended accessories: 2324099
Incl. VAT 0%
26.29 EUR
- Sensor Type: Hall Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Fitting Position: before catalytic converter
- Lambda Sensor: Planar probe
- Number of pins: 4
- Cable Length [mm]: 570
- Lambda Sensor: Thread pre-greased
Incl. VAT 0%
40.73 EUR
- Oxygen Sensor: Regulating Probe
- Thread Size: M18x1.5
- Cable Length [mm]: 880
- Number of circuits: 4
- Oxygen Sensor: Thread pre-greased
Incl. VAT 0%
19.92 EUR
- Number of pins: 4
- for OE number: 038 906 051 C
- Lambda Sensor: Heated
- Lambda Sensor: Regulating Probe
- External Thread Size: M18 x 1,5
- Spanner Size: 22
- Number of circuits: 4
- Oxygen Sensor: Heated
- Oxygen Sensor: Regulating Probe
- External Thread Size: M18 x 1,5
- Spanner Size: 22
- Number of circuits: 4
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Lambda Sensor: Heated
- Conductor Number: 5
- Cable Length [mm]: 740
- Fitting Position: before catalytic converter
- for OE number: 06J 906 051 C
Incl. VAT 0%
34.98 EUR
- Fitting Position: before catalytic converter
- Fitting Position: after catalytic converter
- Lambda Sensor: Planar probe
- Number of pins: 4
- Cable Length [mm]: 650
Incl. VAT 0%
45.69 EUR
- Fuel Mixture Formation: Direct Injection
- Number of pins: 3
- Supplementary Article/Info 2: High Pressure Side
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Oxygen Sensor: Regulating Probe
- Length [mm]: 440
- Fabrication Number: ESL-VW-009
Incl. VAT 0%
26.05 EUR
- External Thread [mm]: M10 X 1 MM
- Spanner Size: 27
- Tightening Torque [Nm]: 45
Incl. VAT 0%
31.79 EUR
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Number of circuits: 3
- Plug Type: Butt Joint
- Cable Length [mm]: 200
- Wire cross-section [mm²]: 0,5
Incl. VAT 0%
21.29 EUR
- Guarantee: 5 years guarantee
- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
