Garage 
Login 
- Number of circuits: 4
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
Sensor/Probe - FORD FIESTA VI (CB1, CCN) (2008 - 2025) 1.6 Ti, 99 kW
- Number of pins: 2
- Cable Length [mm]: 450
- Tightening Torque [Nm]: 20
- Sensor Type: Piezoelectric Sensor
- Assy./disassy. by qualified personnel required!:
- Pressure [Pa] from: 10,000
- Pressure [Pa] to: 117,000
- Voltage [V]: 5
- Resistor [Ohm]: 2,080
- Number of pins: 4
- Voltage [V]: 12
- Corresponds to the original part in colour: anthracite
- Number of pins: 3
- Sensor Type: Impulse Sensor
- Assy./disassy. by qualified personnel required!:
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- for OE number: 1113382
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 480
- Colour: black
- Number of pins: 6
Incl. VAT 0%
86.25 EUR
- Operating Mode: Electric
- Length [mm]: 51.6
- Number of connectors: 3
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Pressure from [kPA]: 10
- Pressure to [kPA]: 117
- Output Voltage, from [V]: 0.405
- Output Voltage, up to [V]: 4.75
- Length [mm]: 450
- Housing Type: without housing
- Number of pins: 6
- Number of connectors: 6
- New Part:
- Used part return not required:
Incl. VAT 0%
45.54 EUR
- Weight [kg]: 0.061
- Line insulation design: with silicone-coated woven-fibre insulation
- Weight [kg]: 0.086
- Lambda Sensor: Thread pre-greased
Incl. VAT 0%
45.99 EUR
- Length [mm]: 400
- Number of connectors: 4
- Colour: black
- Number of pins: 4
- Weight [kg]: 0.022
Incl. VAT 0%
36.06 EUR
- Number of pins: 3
- Fitting Depth [mm]: 24.2
Incl. VAT 0%
11.27 EUR
- Cable Length [mm]: 435
- Number of pins: 2
Incl. VAT 0%
33.37 EUR
- Housing Type: without housing
- Number of pins: 6
Incl. VAT 0%
92.51 EUR
- Number of pins: 4
- Pressure from [kPA]: 10
- Pressure to [kPA]: 120
- Sensor Type: NTC Sensor
- Number of pins: 2
- Housing Colour: grey
- Cable Length [mm]: 450
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 400
- Technical Information Number: Universal 77015
- Length [mm]: 350
- Number of pins: 4
- Technical Information Number: Universal 77004
