Garage 
Login 
- Cooling Hose: from expansion tank to engine cooler
- for OE number: 1425192
Radiator Hoses - FORD FOCUS II (DA_, HCP, DP) (2004 - 2013) 1.6 Ti, 85 kW
- Cooling Hose: from connecting pipe to heat exchanger
- Fitting Position: Centre right
- for OE number: 1469329
- Cooling Hose: from expansion tank to engine cooler
- for OE number: 1386837
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Lower Left
- for OE number: 1384145
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Upper Right
- for OE number: 1520851
- Weight [kg]: 0.293
- Packaging length [cm]: 28
- Packaging width [cm]: 11
- Packaging height [cm]: 9
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 31
- Guarantee: 3 years guarantee
- Weight [kg]: 0.58
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from expansion tank to engine cooler
Incl. VAT 0%
15.26 EUR
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Centre left
- Cooling Hose: Piping to radiator
- Transmission Type: 5-Speed Manual Transmission
Incl. VAT 0%
13.70 EUR
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Forward- /Backflow: for foreflow
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Cooling Hose: from engine to heat exchanger
- Vehicle Equipment: for vehicles without parking heater
Incl. VAT 0%
16.71 EUR
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 636
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 31
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Fitting Position: Upper
- Forward- /Backflow: for foreflow
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 31
- Length [mm]: 636
- Fabrication Number: CPP-FR-005
Incl. VAT 0%
4.68 EUR
- Cooling Hose: Output, radiator
- Fitting Position: Lower Right
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 0%
15.65 EUR
- Cooling Hose: Expansion Tank to Engine
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 0%
20.57 EUR
- Fabrication Number: CPP-FR-012
Incl. VAT 0%
5.69 EUR
- Fabrication Number: CPP-FR-020
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article/Info 2: with clamps
Incl. VAT 0%
55.86 EUR
- Fitting Position: Inlet
- Quantity Unit: Piece
- Weight [g]: 155
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
