Garage 
Login 
- Fitting Position: Front Axle
- Cone Size [mm]: 15.9
- Thread Size: W9/6" x 18
- External Thread [mm]: 45.65
83500202AB - Ball Joint OE number by AMC, CHRYSLER, JEEP
Total number of products found: 16
- Fitting Position: Front Axle
- Fitting Position: Lower
- Diameter [mm]: 41
- Thread Size 2: 5/8x18h
- Weight [kg]: 0.52
- External Thread Size: M16 x 1,5
- External Thread Size: M14 x 1,5
- Control/Trailing Arm Type: for control arm
- Fitting Position: Upper Front Axle
- Fitting Position: Lower Front Axle
- Fitting Position: Lower
- Cone Pitch: 1/8
- Cone Size [mm]: 18.3
- Overall Height [mm]: 88
- Thread Size 1: 5/8''x18
- Fitting Position: Front Axle
- Fitting Position: outer
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Fitting Position: Lower
- Diameter [mm]: 42
- Fabrication Number: ZSD-CH-004B
- External Thread Size: M16 x 1,5
- External Thread Size: M14 x 1,5
- Control/Trailing Arm Type: for control arm
- Fitting Position: Upper Front Axle
- Fitting Position: Lower Front Axle
Incl. VAT 0%
68.77 EUR
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Outer Diameter 1 [mm]: 41.5
- External Thread [inch]: 5/8x18h
- Weight [kg]: 0.53
- Fitting Position: Front Axle
- Fabrication Number: ZSD-CH-004
- Fitting Position: Upper Front Axle
- Fitting Position: Lower Front Axle
- Fitting Position: Rear Axle
- Weight [kg]: 1.065
- Packaging length [cm]: 12.5
- Packaging width [cm]: 10.5
- Packaging height [cm]: 6
- Fitting Position: Upper Front Axle
- Diameter [mm]: 45.5
- Cone Size [mm]: 15.8
- Thread Size 1: MM14x1,5R
- Article number of the recommended special tool: R10067
- Fitting Position: Lower Front Axle
- Diameter [mm]: 41.5
- Cone Size [mm]: 18.3
- Thread Size 1: 5/8''x18
- Article number of the recommended special tool: R10111
- Fitting Position: Front Axle
- Observe service information:
- only in connection with: Circlip
Incl. VAT 0%
27.59 EUR
- Fitting Position: Front Axle both sides
- Thread Size: W5/8" x 18
Incl. VAT 0%
11.41 EUR
- External Thread Size: M16 x 1,5
- External Thread Size: M14 x 1,5
- Control/Trailing Arm Type: for control arm
- Fitting Position: Upper Front Axle
- Fitting Position: Lower Front Axle
- Fitting Position: Lower
- Cone Pitch: 1/8
- Cone Size [mm]: 18.3
- Overall Height [mm]: 88
- Thread Size 1: 5/8''x18
