Garage 
Login 
Engine Electrics - VW PASSAT B5 Variant (3B5) (1997 - 2001) 1.6, 74 kW
- Number of circuits: 4
- Overall Length [mm]: 1,010
- Available as universal article as well, see article no.: 0258986505
- Recommended change interval [km]: 160,000
- Number of circuits: 4
- Overall Length [mm]: 1,760
- Available as universal article as well, see article no.: 0258986615
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
- Voltage [V]: 12
- Number of pins: 3
- Tightening Torque [Nm]: 20
- Corresponds to the original part in colour: green
- Cable Length [mm]: 740
Incl. VAT 0%
39.43 EUR
- Voltage [V]: 12
- Number of pins: 3
- Tightening Torque [Nm]: 20
- Corresponds to the original part in colour: green
- Cable Length [mm]: 800
Incl. VAT 0%
33.64 EUR
- Mounting Type: Plugged
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with gasket/seal
- Colour: green
- Sensor Type: NTC Sensor
- Mounting Type: Plugged
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with gasket/seal
- Colour: green
- Sensor Type: NTC Sensor
- Voltage [V]: 12
- Cable Length [mm]: 500
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
Incl. VAT 0%
37.86 EUR
- Voltage [V]: 12
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: with clip
- Supplementary Article/Info 2: Holder may need adaptation
- Number of mounting bores: 1
- Voltage [V]: 12
- Resistor [Ohm]: 900
- Tolerance [%]: 10
- Cable Length [mm]: 570
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.15
- Tolerance [%]: 15
- Mounting Type: Bolted
- Number of pins: 3
- Suction pipe connector diameter [mm]: 75
- Assy./disassy. by qualified personnel required!:
- Mounting Type: Bolted
- Number of pins: 4
- Suction pipe connector diameter [mm]: 75
- Assy./disassy. by qualified personnel required!:
- Lambda Sensor: Heated
- Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 700
- Lambda Sensor: Regulating Probe
- Lambda Sensor: Heated
- Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 1,100
- Operating Mode: Electric
- Voltage [V]: 12
- Voltage [V]: 12
- Number of pins: 4
