Garage 
Login 
- Number of circuits: 3
- Overall Length [mm]: 506
- Available as universal article as well, see article no.: 0258986502
- Recommended change interval [km]: 160,000
Engine Electrics - AUDI 100 C4 Saloon (4A2) (1990 - 1996) 2.6 quattro, 110 kW
- Number of circuits: 3
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
- Voltage [V]: 12
- Number of pins: 3
- Tightening Torque [Nm]: 20
- Corresponds to the original part in colour: green
- Cable Length [mm]: 740
Incl. VAT 0%
39.43 EUR
- Voltage [V]: 12
- Number of pins: 3
- Tightening Torque [Nm]: 20
- Corresponds to the original part in colour: green
- Cable Length [mm]: 800
Incl. VAT 0%
33.64 EUR
- Mounting Type: Bolted
- Voltage [V]: 12
- Resistor [Ohm]: 2,080
- Resistor [Ohm]: 294
- Supplementary Article/Supplementary Info: with gasket/seal
- Voltage [V]: 12
- Sensor Type: Hall Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- SVHC: 7439-92-1; Lead
Incl. VAT 0%
54.54 EUR
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Thread Size: M10x1
- Spanner Size: 24
- Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- for OE number: 048906265
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 521
- for OE number: 078906265B
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 710
Incl. VAT 0%
44.34 EUR
- Cable Length [mm]: 317
- Lambda Sensor: Finger probe
- Lambda Sensor: Heated
Incl. VAT 0%
27.25 EUR
- Cable Length [mm]: 490
- Oxygen Sensor: Finger-type Sensor
- Oxygen Sensor: Heated
- Pressure [bar]: 3.5
- Housing Colour: blue
- Thread Size: M10×1.6
- Diameter [mm]: 24
- Spanner Size: 24.0
- Housing Colour: white
- Number of pins: 2
- Thread Size: M10x1
- Spanner Size: 19
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
- Cable Length [mm]: 490
- Thread Size: M 18x1,5
Incl. VAT 0%
81.04 EUR
- Length [mm]: 725
- Fitting Depth [mm]: 41
- Article number of recommended accessories: N 905 003 01
Incl. VAT 0%
33.06 EUR
- Housing Colour: white
- Thread Size: M10 x 1,0
- Number of pins: 2
- Supplementary Article/Supplementary Info: with seal
- Temperature range [°C]: 25
Incl. VAT 0%
4.74 EUR
- Switch Point [°C]: 118
- Colour: brown
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
